Early Rockets

This page is a collection of some of my smaller rockets that I've built. They are all in 1/96 scale and are all small. One of them is really small. I want to keep a consistent scale with my rockets, and 1/96 works rather well for that. The small ones aren't too small, and the big ones aren't too big. All these models are available at Neil's Paper Models.

German V-2 A4v4 Prototype

The first of the rockets is the German V-2 A4v4 Prototype, launched on October 3rd, 1942. It was the first successful launch of a V-2 rocket, and is what really got the V-2 program going. I really liked this model. Easy construction, great instructions, and a nicely detailed model.

German V-2 A4v4 Prototype
German V-2 A4v4 Prototype

I really like the details that was put into this model. I like to be able to look at a model from far away as well as up close. Some paper models don't have that up close look to them, and I think it takes away from them. One of the things that I like about Neil's models is that he adds depth to thin and small details. For instance, the fins aren't just two pieces of paper glued together. There are actually three smaller sheets of paper in between the sides, and it makes the fins look much nicer.

The upper section
The upper section

The lower section
The lower section

I didn't build the stand for this model, because I don't really like the 'box stand' look. I may go and design a nice stand for it some time, but for now it's just going to sit on the shelf stand-less.

The thrust chamber
The thrust chamber

Hermes RV-A 10

This little rocket was a part of a program to develop solid rocket technology. The Hermes RV-A 10 was a test to see if they could build larger rockets that were powered by solid propellant. There is more information about the program on Neil's Paper Models site, and it is a good summary of the program.

The little Hermes
The little Hermes

This tiny model is actually a 'bonus' model for his 1/32 scale model. The picture of his Hermes to a 1/32 scale V-2 looks quite nice, and I'm sure build up to a beautiful model. I wanted to stick to 1/96 scale, so I built this little thing to look good next to my 1/96 scale V-2.

The hot end
The hot end

Viking Rockets

These three rockets were part of a sounding rocket program at the Naval Research Laboratory. The intention was to develop new rocket technology, and the Viking rockets were constantly evolving through out the program. After Viking 7, the rocket was almost totally redesigned so the later rockets looked much different from the earlier ones. They launched 14 Viking rockets all together, with the last two called Viking TV-0 and TV-1.

Viking 7
Viking 7

Another shot
Another shot

The exhaust nozzle
The exhaust nozzle

Both of these models were fairly easy to build, but the small diameter of the rockets made it a little tricky to work with. I actually had to build the Viking 7 body tube three times before I was happy with the result. The rest of the construction was pretty simple though.

Viking 10
Viking 10

Another shot
Another shot

The lower section
The lower section

The hot end
The hot end

I built this quite a while after the first two here. It was almost the same as Viking 10, but just different enough to notice. This one also went together rather well. I was impressed with the design of all of these models.

Viking TV-0
Viking TV-0

The top part - nice fins
The top part - nice fins

The engines
The engines

All of these models are great for quick builds, but they aren't simple. They are just small. I built most of these in one or two sittings. I would recommend these models to anyone who likes paper models, and especially rockets.